Tremec has built a running, driving manual-transmission C8 Corvette, and the car is not a rumor or a rendering. The company brought a one-off Peitz Performance race car fitted with its manual transaxle to Motorsports Gateway, a new private track outside Howell, Michigan, and allowed a reporter and several potential customers to drive it. The test car is a track build with a full cage and harnesses, and its shifter emerges where the production C8's storage cubby and automatic selector normally sit.
The C8 was already a major departure for Chevrolet: it was the first Corvette with the engine behind the driver, and the first offered only with a dual-clutch automatic. Developing both a manual and an automatic transaxle for the mid-engine layout would have been expensive, and the dual-clutch-only route is described as the likely choice. That decision produced a highly capable car, but it left enthusiasts who wanted a third pedal without a factory option.
Tremec's development car addresses that gap, though not as a turnkey production package. Peitz Performance did not have to make major changes to the C8's structure. The tunnel was cut to install clutch-pedal hardware, but the manual gearbox occupies the same space as the stock dual-clutch unit and does not require exotic mating hardware. The pedal box also has room for a clutch, and the arrangement is said to feel roomier than a previous-generation Camaro's.
The driving experience comes with trade-offs. Because the shifter is remotely mounted and linked by cables, it is less precise and less snick-snicky than the front-engine TR-6060 six-speed used in other GM performance cars. It is also less notchy. Some drivers may prefer the smoother action; others may miss the more mechanical feel of the front-engine layout. Moving the engine forward would essentially create a C7, while moving the shifter rearward would put the driver near the C8's engine bay.
The test car's seating position added another limitation. It has virtually no adjustment, and the driver, who is 5-foot-7, could not reach the floor or brace properly in corners, making heel-toe downshifts awkward. The drive took place on a green track on a November afternoon in Michigan, so the car was not pushed to its limit.
Cost is the larger obstacle. The gearbox alone is quoted at about $75,000, and when combined with the price of a Corvette, a manual C8 build rivals a showroom-spec Z06. Tremec says the price should fall as volume rises. The company also says OEMs are interested in the high-torque manual transaxle, not necessarily or exclusively General Motors, though no customers have been named. The gearbox was engineered to fit the C8, but other automakers may see use for a manual transaxle in their own performance cars.
