KraussMaffei Extrusion has developed a single-stage extrusion process for PVC roofing membranes that replaces the conventional two-stage dryblend route. The new PVC InlineMixing process feeds all solid and liquid components directly into a twin-screw extruder through gravimetric dosing systems, eliminating the separate heating-cooling-mixing combination used to prepare dryblend.
In the traditional route, PVC powder, plasticizers, additives and fillers are processed batchwise in a hot-cold mixer. The dryblend is cooled, stored and later plasticized in a twin-screw extruder before being formed into membrane. KraussMaffei says the inline route removes those intermediate steps and heats the material only once.
According to the company, energy consumption and energy costs can fall by up to 75%, depending on formulation, system parameters and location. It also cites lower capital expenditure because no separate heating-cooling mixer is required, and lower operating costs from reduced space, labor and maintenance needs. The absence of wear parts for the hot-cold mixer is part of that maintenance argument. Those savings are described as dependent on formulation, system parameters and location, so they are not presented as a fixed result for every line.
Continuous dosing and formulation changes
KraussMaffei says the continuous process also allows formula adjustments and color changes to be made during operation through the integrated control system. That could reduce the need to prepare and store separate dryblend batches, which the company links to faster response times and more efficient manufacturing. Christopher Bartel, head of sales for flat and foam at KraussMaffei Extrusion, says manufacturers can adjust formulations directly during production while reducing energy and capital expenditure.
Validation and reference line
The process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and tested with industrial roofing membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for solid components and multiple liquid feeders for free-flowing ingredients. The ZE BluePower series has a Da/Di ratio of 1.65; KraussMaffei says the combination of high torque and large free volume provides a wide process window for different formulations.
According to the company, tests confirmed good gelation of the PVC and high product quality. Mechanical properties and weldability met industrial requirements across several formulations. Bartel says the Technology Center works with customers to test their specific formulations under production-relevant conditions, optimize the process and prepare for industrial implementation.
PVC InlineMixing is already used in an industrial production line for PVC roofing membranes. The reference plant uses two extruders and two calenders to achieve a total throughput of 1,800 kg/h. In that line, PVC, additives and fillers, along with edge trimmings, are processed continuously into finished membranes.
The development points to a leaner production route for PVC roofing membranes, with fewer discrete process steps and more direct use of formulation changes. Its value in a given plant will depend on the formulation, the required output and the existing mixing and extrusion setup, because the reported savings and flexibility gains are tied to those conditions.
