Large-part machining does not always require a large CNC machine tool, according to Fives High Precision Machines (Fives HPM). The company is promoting the Liné Machines RoboTDM, a robotic machining system that carries milling, trimming and drilling tools to the workpiece rather than moving the workpiece into a large machine envelope. The target is applications where tolerances down to approximately 0.1 mm are acceptable.
Bringing the tool to the workpiece
RoboTDM equips an industrial robot with a specialized end effector containing a spindle, toolholder and cutter. It performs material removal directly on large components. Fives lists face milling, deburring, casting burr removal, weld-bead trimming and drilling pilot holes on large aerospace panels or automotive body parts as potential operations. The system can also handle trimming, routing, drilling, edge contouring and pocketing on large composite or thermoplastic fabrications.
The intended advantage is practical. A large CNC machine typically requires substantial setup time and programming, and the entire component must fit inside its working envelope. By contrast, RoboTDM brings the machining capability to the part. Fives says this can shorten setup, simplify programming and avoid the cost and floor-space demands of a large CNC machine for suitable applications. The company is careful to frame the system as an alternative only where ultra-high precision is not required.
Closing the accuracy gap
Industrial robots have traditionally offered flexibility at the expense of positional accuracy. Fives notes that conventional robotic systems typically achieve tolerances of around 0.3 mm, which is insufficient for many machining tasks. The RoboTDM development program therefore focused on high-precision robotic machining, combining robot calibration with advanced look-ahead and motion-planning algorithms.
According to Fives, the software can process programs containing more than one million points without the latency that can otherwise compromise robot motion. That supports smoother trajectory execution, multi-axis contouring and complex machining operations more closely comparable with CNC machining. Fives says RoboTDM can reduce machining deviation by up to 100 μm, or 0.1 mm, which it describes as a threefold improvement over conventional robotic accuracy. The company also reports that several years of R&D and development trials demonstrated cycle-time reductions of up to 70% in trimming and milling, with some individual applications achieving greater savings.
Configurable hardware and processes
The machining end effector can be configured with different spindle sizes, power ratings, torque and speed. Fives lists available spindle power of up to 125 kW, torque of up to 80 Nm and speeds reaching 30,000 rpm, with HSK A63, HSK F63 or HSK A100 taper toolholders. RoboTDM can also incorporate automatic tool changing, tool measurement, tool-breakage detection and part probing. A vision system can support drilling applications.
Machining is not the only process the platform can host. Fives says RoboTDM systems are configurable for waterjet cutting, laser profiling and ultrasonic cutting. The robot’s physical flexibility is relevant for components that are too large or awkward to move through a conventional machine tool. Multiple workstations and customized peripheral equipment are possible, and Fives says relatively modest foundation requirements simplify installation compared with a large CNC machine tool.
Applications and limits
Fives identifies aerospace, defense, maritime and energy as sectors where component dimensions can be substantial and production requirements vary. In those settings, a robot that travels to the workpiece can offer layout and scheduling advantages. The company does not claim the system solves every machining challenge. Where tolerances tighter than 0.1 mm are necessary, Fives says a high-precision CNC machine remains the appropriate choice. RoboTDM is therefore presented as complementary to Liné Machines and the wider Fives HPM portfolio of high-precision machine tools.
The product also illustrates Fives HPM’s “precision at scale” cross-brand message. In this case, scale refers to finding a more efficient way to manufacture large components while applying only the accuracy level the application demands. Fives says RoboTDM reflects customer requirements and an engineering approach built around specific manufacturing challenges rather than forcing applications into standard equipment.
Engineering and support footprint
Fives Liné Machines Inc, now part of Fives HPM, has had a North American presence for almost 50 years through its facility in Granby, Quebec, Canada. The plant produces both Liné CNC machine tools and robotic solutions, including RoboTDM. The site also supports engineering, integration, automation, service and training across equipment lifecycles.
For manufacturers with the right component, Fives argues that RoboTDM can mean lower capital investment, simpler installation, greater flexibility and significantly shorter cycle times than a large CNC machine. The system’s value depends on the tolerance budget: it occupies the space between conventional robotics and a large CNC machine, where 0.1 mm accuracy is sufficient and workpiece size or shape makes a conventional machine envelope impractical.
