Custom Manufacturing

Ahead of Formnext 2026, UK additive manufacturing counts inventions more easily than production

Founders, spin-outs and machine builders set out what stands between British additive manufacturing research and repeat production at home.

Hanna VirtanenNovember 16, 20265 min read2 views

Concept illustration of a metals additive manufacturing workshop in which an engineer inspects a printed part beside a large-format machine and crates of finished components.

Britain is the partner country at Formnext in Frankfurt from 17 to 20 November, and its additive manufacturing sector arrives with a puzzle it has not settled: it generates invention in quantity, holds a modest share of the global market, and still struggles to say who ends up making the parts.

The parallel the industry keeps reaching for sits in Portsmouth. In 1803 the first block-making machines designed by Marc Isambard Brunel and built by Henry Maudslay began work at the dockyard, and by 1808 its 45 machines were producing 130,000 pulley blocks a year for a Royal Navy that knew which sizes it used and in what quantities. The engineering is what gets remembered; the customer's willingness to specify, and to watch a first installation before ordering the next, mattered as much.

What Britain makes and what it measures

Will Richardson, chief executive of Wayland Additive, points to metallurgy and materials science at Sheffield, Birmingham, Cambridge and Oxford, and to the Henry Royce Institute, which connects expertise across institutions. His company grew out of a team with electron-beam experience in the semiconductor industry, and in October one of its Calibur3 metal systems left the Huddersfield plant for the University of Innsbruck, where researchers intend to study difficult materials, including those meant for high temperatures. Britain built and exported the machine; some of the knowledge of what can be done with it will now accumulate in Austria.

The inventive base is better documented than the production base. The European Patent Office counted 1,925 international patent families in additive manufacturing originating in the UK between 2001 and 2020, against 1,938 for France; Additive Manufacturing UK's 2026 annual plan puts the UK market at £515m to £740m in 2024, or 3% to 4.3% of the global total, a range that reflects disagreement between estimates. Neither number says where parts are made. Craig Pyser, AMUK's chair and AMufacture's chief executive, calls that share respectable for the size of the economy while acknowledging the old complaint that British engineers invent what others sell better.

When the grant ends

Jake Hand, co-founder of Exeter-based Rapid Fusion, has seen grant funding from both sides. The company grew out of the distributor Evo 3D and now builds large-format systems; Hand says it is profitable without R&D support and that Innovate UK money let it develop its own technology alongside partners. His criticism concerns the moment a project works: he argues the system backs a project rather than a business. The award buys engineering time for a defined problem, but a buyer asks different questions — whether the machine can make a particular mould, who trains the operator, what happens if it stops mid-job — and answering them for one sale can take months. Innovate UK does fund later-stage work such as customer validation and initial tooling, though general business costs fall outside its scope.

Pyser calls the application process punishing and would like assessors to visit companies that clear screening; Hand accepts that some bids are weak but argues a record of delivery should count towards the next project. Kingston University offers one answer to what happens afterwards. A graduate who joined Rapid Fusion pressed for his employer and his old department to meet, said Lesley Stigling, the university's operations manager, and the result was a £450,000 Zeus robotic cell at the Roehampton Vale campus combining large-format printing with CNC milling.

Equity and the first investor

John Robinson, additive manufacturing research commercialisation manager at the University of Wolverhampton, incorporated a company in May 2017 that funded his PhD, and in 2024 filed several patent applications with the university. A former technology transfer office wanted 75% of the company, he recalls; more recent talks with the enterprise team concerned a 10% stake. Both were proposals, but the gap is wide: the Royal Academy of Engineering and Dealroom found that among UK deep-tech hardware spin-outs in their sample the average non-cash stake taken by universities fell from 25% in 2015–19 to 14% in 2024–25.

Louis Masters has already crossed that threshold. Hydra Manufacturing, a University of Leeds spin-out developing equipment for technical ceramics, announced £320,000 in equity investment led by SFC Capital in March, taking support including earlier grants to about £577,000, and was weighing a raise of £1m or more. He understands why an investor wants two more installations, and why pursuing those customers competes with fundraising; Germany, with its concentration of advanced ceramics producers, is the natural market.

The experience that comes with the order

Richardson locates the difficulty where the usual commercialisation account does not: without doing the doing, a sector does not get good at it. Britain's installed base of industrial equipment is limited, and in some Wayland markets so is the number of major customers willing to put work through it. A CNC machinist can learn to run an additive system, but where several factories use the equipment an employer can hire someone who has already prepared builds and kept a machine productive; with a small base, each firm trains more itself.

Renishaw's Ben Deary and Ed Littlewood describe what happens when production returns after years of buying abroad: a machine can be commissioned and operators hired only to find that a supplier of a component or service has disappeared. They point to Apex Additive Technologies in Wales, which develops process parameters and makes first parts so a customer can prove a process before taking it in-house. Jason Hutt of Fastech puts the incumbent's advantage plainly: the casting is already approved. An additively manufactured replacement may pass material tests and still need evidence tied to specific equipment, process and grade, and a second buyer may ask for much of it again — arithmetic that differs sharply between fifty parts and five thousand. The £38m Airbus-led DECSAM programme, with Renishaw, GKN Aerospace and Apex among partners, is one attempt to share that cost in civil aerospace.

Where the customers are

Jason Bowes, chief operating officer of CloudNC, told a Manufacturing Technologies Association briefing at the House of Lords on 12 November that selling the company's AI-assisted CNC programming software is far easier in the United States than at home; a machining business weighing it legitimately wants to know who has already paid for the mistakes. AMufacture shows the opposite case. Pyser estimates 95% to 98% of its work is now production, with defence the largest sector over the past year. Some defence customers revise designs every six to eight weeks, so a local supplier able to take a revised file and deliver the next batch can win repeat orders while the product keeps changing. One customer that took some production in-house kept ordering and two years later sold the machine back: software, staff and post-processing had made the in-house operation costlier than expected.

What public procurement can buy

James Selka, chief executive of the MTA, told the Lords briefing that investment was ready to enter British manufacturing but needed a proper demand signal and co-investment from government, with energy prices the first obstacle. Lord Harrington of Watford, chair of Make UK, recalled that sector deals worked where companies could match public money, and knew the financing problem from the other side: GeoPura, the hydrogen power business he chaired, was sold to Canada's Ballard Power Systems in a deal completed in August for £275m upfront.

Procurement is the lever government directly controls. In 2025 the UK Atomic Energy Authority commissioned two additive systems at its Central Support Facility — a Freemelt electron-beam machine for tungsten work and a Nikon SLM laser system supplied by Kingsbury Machine Tools with support from Additure — while British participants including Laser Additive Solutions, The Welding Institute and WAAM3D contributed to fusion maintenance projects. The authority publishes a quarterly procurement pipeline separating possibilities one to five years out, pre-commercial work and confirmed requirements. For a machine builder, the question is when the next specification is drawn up.

Pyser has a test for Frankfurt: an overseas company choosing Britain as its European base would count. Smaller questions will be answerable in a year — whether a visitor who saw a British-built machine ordered one, and whether a first installation led to a second. The Admiralty answered Brunel in May 1803 by ordering machines for smaller blocks.