Repeat orders now generate around 70% of revenue at 3T-AM, the Newbury-based metal additive manufacturing business, while new product introduction still consumes roughly 80% of the team's time, according to commercial director Eddie Andrews. The figures, given to 3D Printing Industry for its AM UK series ahead of Formnext 2026, describe a company whose income has largely shifted onto production work without abandoning the development jobs that feed it.
When Andrews joined in November 2021, the manufacturer could produce a one-off metal component for any one of hundreds of customers. What it had not solved was how to win the order to make the same component again, at the agreed price and on schedule. Andrews framed the problem bluntly, asking how the company could make that work "boring" — how to turn bespoke jobs into general manufacturing.
A machine order book rather than a machine wish list
Five years later, the answer is visible in how 3T-AM buys its EOS metal printers. Previously the company might have bought an M400 to try a different material and see what business it could develop. Today, Andrews says, customers' programmes account for the capacity of incoming machines before those machines reach the factory. He describes the investment as "quite boring" — a comment on its basis in contracted demand rather than exploratory capacity.
Demand is not evenly spread. Semiconductor customers generate the strongest requirement, followed by energy, then space and defence. Aerospace remains central to the company's plans, but 3T-AM has found work for its machines while it waits for more aerospace programmes to reach suppliers at volume.
Fewer customers, fewer processes
The company dates its business to 1997 and its first metal machine to around 2008. By the 2021 reset, years of accommodating individual prototype jobs had layered process upon process on the shop floor. Management narrowed the customer base, gave larger accounts more influence over what the company developed, and simplified procedures that had accumulated. Much of the work stayed manual while the team worked out which operations it could repeat reliably.
Who owns the part, and who decides its condition
Changing responsibility mattered as much as changing equipment. When the first person to see a drawing was the engineer responsible for printing it, the natural question was how the part would be printed, and decisions taken at that point shaped the work handed to everyone else. Now a product owner is accountable for delivering the finished component, and the print and machining specialists agree what condition the part must be in as it passes from one operation to the next.
Andrews argues that a successful additive manufacturer must also be a strong CNC machining business. Bringing machining in-house gave the SME more control over cost, quality and delivery dates, while larger multi-laser machines raised productivity at the printing stage. Neither investment on its own could tell a customer when a finished part would arrive, which is why the handoffs between operations became a management question rather than a scheduling detail.
The commercial transition was harder to time than to describe
Production orders rose and then tapered off. Turning away too much prototype work during the upswing would have left gaps when demand eased, so the company carried both. Repeat orders now give 3T-AM room to choose which development jobs it accepts. Some will never become production contracts, but Andrews' position is that a supplier which does not take part in the journey never finds out which ones will.
New ownership, a shorter timetable
Austrian precision manufacturing group SBO acquired 3T-AM in October 2025. The Newbury business had generated around £5 million in sales in 2024. SBO brought experience in machining downhole drilling equipment, including components up to ten metres long; what drew it to 3T-AM was metal printing expertise and access to a different set of industrial customers. The group approved a five-year business plan and asked whether it could be executed faster. In August 2026 SBO reported that 3T-AM had added an EOS M400 in the second quarter, ordered another printer and invested further in post-processing, part of a seven-printer expansion across its UK and US operations.
What a full order book forecloses
A committed order book makes the next machine easier to justify, but it also leaves little time on that machine to qualify a different material or develop a new product. Andrews wants to preserve two distinct reasons to invest: contracted demand, and the work 3T-AM cannot yet offer.
The scale of committed demand is illustrated by a pre-pandemic aerospace enquiry, in which a single family of parts would have required 16 multi-laser systems to cover only a share of the requirement. From the buyer's side of the table, the question is how many suppliers have the floor space, capital and capacity to take such work on — one reason Andrews cites for original equipment manufacturers keeping sizeable additive programmes in-house.
Where the calculation works, and where it tightens
For some customers, replacing a casting with a printed part earns its keep on lead time alone: a legacy or development programme can obtain a component sooner even at much the same unit cost. At higher volumes the arithmetic is harder. Machine maintenance contracts and consumables weigh on the hourly rate, and a factory running a single shift has fewer productive hours over which to spread those costs. Andrews sees scope to learn from CNC shops that operate around the clock; one place he would look for automation is support removal, where the process can still depend on what an experienced operator knows about a particular job.
Carbon per part, at no extra charge
A project with Honeywell Aerospace will test a different claim. Under an Aerospace Technology Institute-funded programme, the partners are converting an existing conventionally manufactured component to additive production. The sustainability team at the NCC in Bristol is carrying out a 12-month life-cycle assessment covering manufacture, service and end of life. Printing closer to the finished shape is expected to use less feedstock and leave less metal to machine away than starting from billet; the study will compare the two routes alongside any benefit the redesigned component delivers in service.
The intended output in Newbury is something a purchasing department can use. As 3T-AM connects its factory and enterprise systems, it is developing digital product passports to document the carbon associated with making an individual component. By the end of 2028, Andrews wants that information to accompany every part at no extra charge, making it one more item a customer compiling a supply-chain emissions report could expect from a routine order.
The passenger passports and the life-cycle comparison are targets and work in progress rather than reported results. What the record does show is a supplier that has rebuilt its processes, its job ownership and its capital case around repeatability, and now has to protect room for the development work that produced those orders in the first place.
